Push Valve Inflator

Push Valve Inflator
AED120.00 *

Prices plus VAT

Ready to ship today,
Delivery time appr. 3 workdays

  • SW10006
The Universal Plus has a flex tip inflator for inflation of latex balloons and a separate... more
Product information "Push Valve Inflator"

The Universal Plus has a flex tip inflator for inflation of latex balloons and a separate auto-fill foil outlet that automatically cuts out when the foil balloon is inflated.

Operating instructions:  Push Valve Inflator

  1. Ensure the cylinder valve is closed
  2. Connect the inflator to the cylinder using the push fit connection
  3. Open the cylinder valve by turning the hand wheel anti-clockwise
  4. Place a latex balloon over the blue filling nozzle
  5. Pull the nozzle back to release gas (holding the neck of the balloon tight around the nozzle)
  6. Once inflated to the correct size, return the nozzle to its original position and remove the balloon.
    Tie the balloon
  7. When finished inflating, turn off the cylinder valve by turning the hand wheel clockwise
  8. Once the valve is closed, drain the residual gas in the inflator by pulling back the nozzle
  9. Remove the inflator (never attempt to remove the inflator whilst the cylinder valve is on or before the residual gas has been drained)

 

Related links to "Push Valve Inflator"